Zoom G2.1NU Uživatelský manuál stáhnout pdf (Strana 27)

ZOOM G2Nu/G2.1Nu

Set the control parameter and

adjustment range

1. Select a patch that uses the expression

pedal.

WhenusingtheG2Nu,connectanoptional

expressionpedal(FP01/FP02)totheCONTROL

IN jack.

2. Set the module selector to "TOTAL" and

use the effect type [▼]/[▲] keys to select

"RTM."

3. Turn Parameter knob 1 to set the module to

be controlled by the expression pedal.

OntheG2.1Nu,youcanalsousethePEDAL

ASSIGN key to set the module controlled. The

indicator lights next to the selected destination.

Indicator

Destination

(DEST) display

Parameter controlled

OFF (None) (None)

VOLUME VOLUME Volume

EFX EFX EFX module

DRIVE DRIVE DRIVE module

MOD MODULATION MODULATION module

DELAY DELAY DELAY module

REVERB REVERB REVERB module

• IntheEffectTypeParameterssection,apedal

icon appears next to effect types/parameters

that can be controlled by an expression pedal

(→P33–48).

• Whensetto"VOLUME,"thevolumecannot

exceed the range set by the master level and

patch level parameters.

• Forsettingsotherthan"VOLUME,"ifyoupress

the built-in expression pedal until it stops and

then push it down farther, you can turn the con-

trolled module ON/OFF.

• WhenthecontrolledmoduleisOFF,theindica-

tornexttoitblinks(ontheG2.1Nu).Inthis

state, you can press hard on the built-in expres-

sion pedal to turn the module ON, or choose a

different module to be controlled.

4. Use Parameter knobs 2 and 3 to change the

adjustment range of the control parameter.

UseParameterknob2tosettheminimumvalue

(MIN)andParameterknob3tosetthemaximum

value(MAX).Therangethatcanbesetdepends

onthecontrolledmoduleselectedinstep3.

UsinganExpressionPedal

UsetheG2.1Nu'sbuilt-inexpressionpedaloranoptionalconnectedexpressionpedal(FP01/FP02)tocontrolvolume

and effect parameters in real time.

HINT

Set range

(maximum)

Select control

destination

Set range

(minimum)

NOTE

Parameter value

When MAX > MIN

MAX

MIN

Parameter value

When MAX < MIN

MAX

MIN

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 55 56

Komentáře k této Příručce

Žádné komentáře

Zoom G2.1NU Uživatelský manuál Strana 27

Komentáře k této Příručce

Související produkty a manuály pro Hudební nástroje Zoom G2.1NU